Factories & Industry
Turnkey fire suppression for factories and industrial production facilities
Overview
In industrial facilities, fire risk varies by process, storage and the type of combustible material. A factory fire suppression system requires water, foam, gas suppression and detection as an integrated whole with hazard-class-specific risk analysis. A-Pro delivers risk analysis, hydraulic/concentration calculation, engineering, installation and commissioning under one roof. We start with a free site survey in Ankara and surrounding provinces.
How it works
Automatic Detection
Automatic detection is mandatory in industrial buildings above 21.50 m height or 7,500 m² (Annex-7).
Hazard-Based Suppression
Water, foam or gas suppression by combustible type; 1,000 m² compartments in high-hazard areas.
Warehouse & Rack Protection
Rapid suppression in high-bay warehouses with in-rack sprinklers and ESFR solutions.
Foam Suppression
Fluorine-free (F3/SFFF) foam suppression in processes with flammable liquids and fuels.
Process Risk Management
Dedicated suppression and explosion-mitigation systems against paint, chemical and dust-explosion risks.
Fire-Brigade Inlet
External intervention infrastructure with a hydrant line and fire-brigade inlet in large facilities.
Our delivery process
- 01
Free Survey
Determine process type, combustible inventory, storage height and hazard class.
- 02
Risk & Hazard-Class Analysis
Define fire load, explosion risk and the appropriate suppression method (water/foam/gas).
- 03
Engineering & Approval
Hydraulic/concentration calculation, compartment plan and code approval.
- 04
Supply & Installation
Pump station, sprinklers/ESFR, foam dosing, gas system and detection.
- 05
Testing & Commissioning
Pressure-flow test, foam-ratio test and acceptance procedures on handover.
- 06
Maintenance & Monitoring
Continuous readiness via a periodic maintenance contract without disrupting production.
Maintenance & periodic inspection
BYKHY and relevant standards require periodic inspection of industrial facilities; A-Pro keeps the system ready at any moment without disrupting production through a testing and maintenance contract.
- Weekly/monthly fire-pump run and gauge checks
- Sprinkler/ESFR head and alarm-valve inspection
- Foam concentrate quantity, shelf-life and dosing test
- Gas-system cylinder weighing and door-fan test
- Detector and panel test
- Hydrant and fire-brigade inlet pressure test
Frequently asked questions
What is the detection threshold in a factory?+
Automatic detection is mandatory in industrial buildings above 21.50 m height or 7,500 m² (Annex-7).
Which suppression system is suitable?+
Water, foam or gas suppression is selected by combustible and process type, determined through risk analysis.
What drives the cost of a factory fire suppression system?+
It depends on facility area, hazard class, storage height and the selected suppression method. A clear quote is shared after a free survey.
How is a high-bay warehouse protected?+
In-rack sprinklers and ESFR solutions suppress fire early at rack level.
Do you use fluorine in foam systems?+
No. A-Pro uses fluorine-free (F3/SFFF) foam concentrates, alcohol-resistant (AR-SFFF) for polar liquids.
Related systems
Sectors
Let us engineer your facility’s fire safety to standard
Contact us for a free site survey within Ankara and a quote. Turnkey solution from design to commissioning.