NOVEC 1230 (FK-5-1-12)
Eco-friendly liquid clean agent (FK-5-1-12)
Last updated: 07 September 2026
Overview
NOVEC 1230 (FK-5-1-12) is an eco-friendly clean fire-suppression agent with a global warming potential (GWP) of ~1, leaving no residue and offering a wide safety margin for use in occupied spaces.
NOVEC 1230 (FK-5-1-12) is a clean agent stored as a liquid at room temperature that vaporizes on discharge. It suppresses fire primarily by absorbing heat; with very low global warming potential (GWP ~1) and a short atmospheric lifetime (~5 days), it is among the most environmentally superior clean-agent options. A-Pro designs to TS ISO 14520-5 and NFPA 2001.
How it works
Environmental Superiority
GWP ~1, zero ODP; breaks down in ~5 days. Suited to sustainability-focused facilities.
Wide Safety Margin
Large margin between design concentration and NOAEL; safely applied in occupied spaces.
Liquid Storage
Liquid at room temperature; low-pressure handling with manageable storage volume.
Suited to Sensitive Content
Residue-free; preferred for museums, archives and data centers with valuable content.
System types
Central (Total Flooding) System
Architecture that floods the whole room with NOVEC 1230 from a cylinder bank; for large data centers and high-value halls.
Modular System
Single cylinder plus integrated panel for a small room/panel; liquid storage enables low-pressure, compact layout.
Multi-Zone (Selector Valve) System
A shared cylinder bank protects several rooms via selector valves; cuts cylinder cost in multi-room facilities.
Clean-agent comparison — NOVEC 1230 vs FM200
| Property | NOVEC 1230 (FK-5-1-12) | FM200 (HFC-227ea) |
|---|---|---|
| Global Warming Potential (GWP) | ≈1 | ≈3220 |
| Atmospheric lifetime | ≈5 days | ≈33 years |
| NOAEL (safety threshold) | 10% | 9% |
| Typical design concentration | 4–6% | 7–9% |
| Discharge time | ~10 seconds | ~10 seconds |
| Storage footprint | Compact (liquid) | Most compact |
| Best fit | Occupied spaces + environmental priority | Space-constrained cylinder rooms |
Our delivery process
- 01
Survey & Risk Analysis
Site assessment of volume, integrity and content value.
- 02
Concentration Calculation
TS ISO 14520-5 based agent quantity and design concentration.
- 03
Room Integrity (Hold) Test
Door-fan test to verify agent hold time.
- 04
Cylinder Bank & Nozzle Design
Nozzle layout and manifold for homogeneous distribution.
- 05
Detection-Cause/Effect Integration
Cross-zone detection, delay, gas shut-off and damper scenarios.
- 06
Testing & Commissioning
Scenario testing, acceptance and handover with training.
Maintenance & periodic inspection
TS ISO 14520 requires periodic inspection; A-Pro ensures continuous readiness with a maintenance contract.
- Cylinder pressure and level check
- Nozzle and pipework inspection
- Detection-control panel scenario test
- Periodic room integrity (door-fan) test
- Gas shut-off, damper and alarm device check
Frequently asked questions
Why is NOVEC 1230 eco-friendly?+
Its global warming potential is about 1 and it breaks down in ~5 days with no ozone impact — the lowest environmental impact among clean agents.
Can it be used in occupied spaces?+
Yes. The margin between design concentration and the safety threshold is wide; with alarm and delay scenarios it is applied in occupied spaces.
Advantage over FM200?+
Its key advantages are very low environmental impact and a wide safety margin; preferred where sustainability and insurance priorities apply.
Is cleanup needed after discharge?+
No. It is residue-free and non-conductive; electronics and valuable content are protected.
Where is it ideal?+
Ideal for high-value spaces where water is unsuitable — data centers, museums/archives, labs and panel rooms.
Related systems
Let us engineer your facility’s fire safety to standard
Contact us for a free site survey within Ankara and a quote. Turnkey solution from design to commissioning.